Ideal for use in:
Living Rooms
Dining Rooms
Bedrooms
Stairs/halls
Our medium pin DIY gripper is designed for ease of installation to both timber and concrete floors. Pre-nailed with dual purpose floor nails for a firm fixing. Each pack has enough gripper for an average size room ie 8 x 5ft lengths. The ideal product for stretch fit carpet installations, our gripper is made from high grade resin bonded plywood, five ply (6mm) thickness, machined on one edge to a defined angle and penetrated from the underside by two rows of passivated pins. The Pins are set at an angle of 60deg to eliminate pull-out and bending, even when power stretching. The carpet backing is then held in place by the pins to allow for correct tension
Type: Gripper
Suitability: Domestic
Application: Nail gripper approximately 6mm away from the face of the skirting so that the carpet can be tucked into the gap between the gripper and skirting board.
Roll Size: 40ft (8 x 5ft Lengths)12.192m
Thickness: 6mm
Manufacturers Guarantee: see terms & conditions
