That's ONLY £0.16/Lin.M (excl VAT)

Our medium pin DIY gripper is designed for ease of installation to both timber and concrete floors. Pre-nailed with dual purpose floor nails for a firm fixing. Each pack has enough gripper for 3 average size rooms ie 24 x 5ft lengths. The ideal product for stretch fit carpet installations, our gripper is made from high grade resin bonded plywood, five ply (6mm) thickness, machined on one edge to a defined angle and penetrated from the underside by two rows of passivated pins. The Pins are set at an angle of 60deg to eliminate pull-out and bending, even when power stretching. The carpet backing is then held in place by the pins  to allow for correct tension.

Pack Size: 36.6 lm or 120ft (24 x 5ft lengths)